GE LOGIQ Focus

LOGIQ Focus is a general imaging system for everyday ultrasound practice, covering routine and more complex care across radiology, liver, vascular, cardiology, OB/GYN and MSK. It is intended for use in a hospital or medical clinic by qualified and trained healthcare professionals. The system has a compact design with a mobile console.

Both configurations share an identical user interface design and layout, so operators move between them without relearning the controls. LOGIQ Focus X has a 23.8" HDU (High Definition Ultrasound) display, an illuminated trackball and a 1 TB integrated SSD. LOGIQ Focus S has a 23.8" LCD display, a non-illuminated trackball and a 512 GB integrated SSD.

Yes. LOGIQ Focus is FDA-cleared under 510(k) K261835, dated July 30, 2026, with a determination of substantial equivalence. It is classified as Class II under 21 CFR 892.1550, Ultrasonic Pulsed Doppler Imaging System, with LOGIQ Fortis (K253366) as the primary predicate. It is also CE Marked to Regulation (EU) 2017/745 on Medical Devices.

LOGIQ Focus is the newest evolution of the LOGIQ family, building on more than 30 years of LOGIQ innovation, with a compact design for everyday ultrasound practice. LOGIQ P8 is its predecessor system, and LOGIQ Fortis (K253366) is its FDA primary predicate, with similar indications plus Thoracic/Pleural under Abdominal and Interventional Guidance.

In a GE comparison on right upper quadrant abdominal ultrasound tasks, tested in July 2026, median time-on-task was 26.1% lower with LOGIQ Focus than with LOGIQ P8 (Holm-adjusted p<0.02). The same comparison found no median time difference against a competitive device, so this result measures the step up from LOGIQ P8 rather than a lead across the market.

In a GE comparison, 19 of 21 physicians (90%) were confident of a diagnostic image in one pass with LOGIQ Focus, compared with 60% in the LOGIQ P8 group and 73% in the competitive device group. LOGIQ Focus was rated higher for overall image quality approximately three times more often than LOGIQ P8 (55% vs. 15%) or the competitive device (40% vs. 13%).

Operating modes are B-Mode, M-Mode, PW Doppler, Color Flow Mode (CFM), Microvascular Imaging (MVI), Power Doppler Imaging (PDI) and Coded Harmonic Imaging (CHI). Anatomical M-Mode has an M-Mode cursor adjustable at any plane, and real-time Triplex Mode runs B or CrossXBeam with CFM or PDI/PW. Other modes are Continuous Wave Doppler, B-Flow, Volume Modes (3D/4D), shear wave and strain elastography, and UGFF/UGAP.

Probes include C1-5-RS convex; 9L-RS, 12L-RS, L3-12-RS, L4-20t-RS and ML6-15-RS linear; M5Sc-RS and 3Sc-RS sector; E8Cs-RS and IC9-RS endocavitary; RAB2-6-RS real-time 4D; the 6Tc-RS TEE probe; and the P6D CW split crystal pencil probe. The console has 4 active probe ports and 1 additional port for the pencil probe.

Yes. The console has a wireless probe connection capable of connecting Vscan Air, and Vscan Air CL is a wireless specialty probe under catalog number H45611DN. Its broad-spectrum convex probe has a maximum bandwidth of 1.9 – 4 MHz, and its broad-spectrum linear probe 4.5 – 12.5 MHz. Wireless LAN 802.11ac/a/b/g/n is available for network connectivity.

Hepatic Assistant combines 2D shear wave elastography and UGFF in a single workflow with the push of a button. Shear wave elastography runs on C1-5-RS, IC9-RS, ML6-15-RS and L3-12-RS and displays measurements in kPa and meters per second. UGFF/UGAP runs on C1-5-RS: Ultrasound Guided Fat Fraction quantifies liver fat infiltration to support steatosis assessment, and Ultrasound Guided Attenuation Parameter has simple and 2D color map displays.

Cardiac Strain gives a quantitative assessment of longitudinal myocardial strain for the left ventricle, right ventricle and left atrium, completed in under three minutes once images are acquired, with a bulls-eye view combining three longitudinal views. Auto EF measures global ejection fraction, and Auto EF w/o ECG does so without ECG leads. Stress echo provides exercise and pharmacological protocol templates, and TVI runs on M5Sc-RS, 3Sc-RS and 6Tc-RS.

Measure Assist OB automatically measures BPD, HC, FL, AC and HL. IOTA provides the International Ovarian Tumor Analysis LR2 worksheet for women with adnexal tumors selected to undergo surgery, on C1-5-RS, IC9-RS, RAB2-6-RS and E8Cs-RS. HDlive provides advanced 3D/4D fetal imaging, OmniView multiplanar views of fetal anatomy and STIC 3D cine capture of the fetal heart.

Microvascular Imaging (MVI) visualizes blood flow down to fine microvascular detail, and Radiantflow displays tiny vessels with a 3D effect. B-Flow runs on C1-5-RS, RAB2-6-RS, 9L-RS, ML6-15-RS, L3-12-RS, 12L-RS and L4-20t-RS, and Hybrid B-Flow is a further flow visualization tool. Auto Abdominal Color Assistant 2.0 automates color parameters and ROI placement. For vascular measurement, Auto IMT automates intima-media thickness measurement from multiple samples across a user-defined length.

Auto Preset Assistant, an AI-powered tool, detects the anatomy and activates the appropriate preset, and clinicians can save up to five clicks per exam. Start Assistant selects the category, probe, preset or scan assistant from the worklist exam description and launches preferred settings. Scan Assistant guides users through factory and user-defined exam protocols, including annotations, mode transitions and measurement initiation.

Report Writer, an on-board package, auto-populates structured reports with measurements, images and findings. The Breast and Thyroid productivity packages provide auto measurement, worksheet summaries, feature assessment, and BI-RADS or TI-RADS (global) assessment. ViewPoint 6 is ultrasound image and reporting management software for radiology, and SonoDefense provides a multilayer, defense-in-depth cybersecurity approach.